Posted on 19 September, 2022

Radiofrequency (RF) shielding is a device specifically designed to block radiofrequency or electromagnetic interference in the PCB. Electromagnetic or radiofrequency interference is an external disturbance that effectively impacts the circuit’s electromagnetic induction. In some cases, the RF interference is placed in the PCB circuit to shield the Electromagnetic Interference (EMI). Hence, in such cases, the […]

Posted on 1 September, 2022

The circuit board development involves various attributions to satisfy the requirements of the given design. One of the most prominent attributes that determine the circuit board design is the power supply and the circuit laid out. It is one of the most important tasks carried out by various PCB layout services to choose the suitable […]

Posted on 12 August, 2022

A transient state is experienced by the voltage and current in an electrical circuit when switching occurs before steady-state conditions are reached. Immediately following the switching action, transients in electrical circuits last for a brief period of time ranging from microseconds to milliseconds. The duration of transients depends on circuit characteristics like capacitance, inductance, and […]

Posted on 10 August, 2022

Become Familiar With PCB Assembly Technologies: More than just the essential parts, a well-designed board is needed for printed circuit board assembly with appropriate technology. There are various choices available here, and each one offers something unique. For instance, pick-and-place technology, manual soldering, and surface mount technology are quite important technologies in PCB assembly. While […]

Posted on 14 July, 2022

A layer of ink traces called a silkscreen is used to identify things like PCB pieces, warning signals, test points, logos, and marks. The silkscreen is often placed to the component side, although it is also customary to use silkscreen on the solder side. However, this can raise the price. In essence, a thorough PCB […]

Posted on 27 June, 2022

One of the most common defences under Proposition 65 is what is often called the safe harbour defense. In its simplest form the safe harbour defense says you don’t have to give a warning, if the daily exposure level in the question is lower than a level set by the state.  The state’s safe harbour […]

Posted on 23 June, 2022

The Extended Minerals Reporting Template (EMRT) is used in cobalt and mica supply chains to determine the country of origin and to identify refiners and processors.  This template is developed by the Responsible Minerals Initiative (RMI). Previously RMI developed separate templates for cobalt and mica called Cobalt Reporting Template (CRT) and Mica Reporting Template (MRT) […]

Posted on 8 June, 2022

Do you know how it all started? Circuit boards were used as a simple substrate with sufficient holes for the electrical components to lead through, which is then soldered to give a complete circuit look. Later on, with the advancement in science and technology, the soldering for networking and electrical components was replaced with conductive […]

Posted on 6 April, 2022

The single-most challenge engineers face in designing electronic circuits is thermal management. Multiple components within the circuit release heat while they run. If that heat is not dissipated correctly, it will damage the component. It affects the active life of the device and leads to product failure. Therefore, this is one of the essential factors […]

Posted on 2 April, 2022

Data Management is the centralized software system that stores all relevant information about a product. It can be deployed across various functions, from design to marketing. This data includes CAD models, parts specifications, requirements, and other information. This blog will focus more on automated product data management and how it improves PCB design & PCB […]