Posted on 17 November, 2022

RMI introduced a new template – Pilot Reporting Template (PRT), to do the due diligence for minerals that are not covered by CMRT and EMRT. The Pilot Reporting Template got launched on November 11, 2022, as PRT v. 1.0. Various companies started to collect the data for metals/minerals that are not included in the CMRT […]

Posted on 31 October, 2022

One of the biggest challenges engineers and circuit developers face is how their products will withstand all the stress or pressure once they are in the field. So this causes unnecessary stress and anxiety among the developers and engineers, which can be overcome by testing the Printed Circuit Board (PCB) at the time of development. […]

Posted on 17 October, 2022

Renewable energy has become one of the most significant ways to retain the country’s resources which leads to high demand for critical minerals, which has never been known. One such mineral that is very high in search is cobalt, which is primarily used in rechargeable batteries, airbags, chemical processing, petroleum, and electric vehicles. The Democratic […]

Posted on 19 September, 2022

Radiofrequency (RF) shielding is a device specifically designed to block radiofrequency or electromagnetic interference in the PCB. Electromagnetic or radiofrequency interference is an external disturbance that effectively impacts the circuit’s electromagnetic induction. In some cases, the RF interference is placed in the PCB circuit to shield the Electromagnetic Interference (EMI). Hence, in such cases, the […]

Posted on 1 September, 2022

The circuit board development involves various attributions to satisfy the requirements of the given design. One of the most prominent attributes that determine the circuit board design is the power supply and the circuit laid out. It is one of the most important tasks carried out by various PCB layout services to choose the suitable […]

Posted on 12 August, 2022

A transient state is experienced by the voltage and current in an electrical circuit when switching occurs before steady-state conditions are reached. Immediately following the switching action, transients in electrical circuits last for a brief period of time ranging from microseconds to milliseconds. The duration of transients depends on circuit characteristics like capacitance, inductance, and […]

Posted on 10 August, 2022

Become Familiar With PCB Assembly Technologies: More than just the essential parts, a well-designed board is needed for printed circuit board assembly with appropriate technology. There are various choices available here, and each one offers something unique. For instance, pick-and-place technology, manual soldering, and surface mount technology are quite important technologies in PCB assembly. While […]

Posted on 14 July, 2022

A layer of ink traces called a silkscreen is used to identify things like PCB pieces, warning signals, test points, logos, and marks. The silkscreen is often placed to the component side, although it is also customary to use silkscreen on the solder side. However, this can raise the price. In essence, a thorough PCB […]

Posted on 23 June, 2022

The Extended Minerals Reporting Template (EMRT) is used in cobalt and mica supply chains to determine the country of origin and to identify refiners and processors.  This template is developed by the Responsible Minerals Initiative (RMI). Previously RMI developed separate templates for cobalt and mica called Cobalt Reporting Template (CRT) and Mica Reporting Template (MRT) […]

Posted on 24 May, 2022

Programmable Interface Controllers or PICs are simple but productive electronic devices used to perform multiple processing tasks. These types of circuits are either used as timers or to control the production line of the entire system. If you are into engineering or related manufacturing processes, you might have encountered these terms multiple times. Earlier, it […]