Posted on 14 June, 2023

When designing an enclosure for electronics packaging, several factors should be considered are as follows, Size and Form Factor:  The size and shape of the enclosure should accommodate the dimensions and configuration of the electronic components. It should provide sufficient space for mounting the circuit boards, connectors, and other necessary elements. Material Selection:  The choice […]

Posted on 9 June, 2023

API 650 and API 620 are both standards developed by the American Petroleum Institute (API) for the design and construction of storage tanks, but they differ in several ways: In generic, API 650 covers the design, fabrication, erection, and inspection of atmospheric storage tanks (tanks that operate at ambient pressure) whereas API 620 applies to […]

Posted on 21 March, 2023

Heat exchangers are devices that transfer heat from one fluid to another fluid without the two fluids mixing. There are several types of heat exchangers. Each type of heat exchangers has its own set of advantages and specific applications. Some common types of heat exchangers used in the industry are: Shell and Tube Heat Exchangers: […]

Posted on 25 February, 2023

Introduction: In any Industrial Machinery elements like Shafts, Keys-Couplings,  Levers, Cams, Screws, Belts-Pulleys, Gears, Chain-Rope drives, Springs are the parts which drive and convert forces to achieve the purpose of the equipment apart from the machine skeleton structures and enclosures. Definition of Springs: Springs are the elastic bodies which will deflect when loaded and to […]

Posted on 24 February, 2023

Introduction:  In Transmission line two main parameters in any mechanisms are the Torque and Speed for Circular, Linear motions. Considering the circular motion elements like Gears, Belts, Chains, Ropes, Screws are the conventional components are being used. Taking in account Gear systems are the major and efficient power transmission elements for defined center distances and […]

Posted on 16 February, 2023

IP rated enclosures refer to the degree of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water. The IP code (Ingress Protection Rating) is a two-digit number assigned to electronic enclosures, with the first digit indicating protection against solid objects and the second digit […]

Posted on 30 January, 2023

It’s been over the decades where many product engineers and designers have been using (Computer-Aided Design) CAD for designing various components and parts in architecture, engineering products, and even for arts. Hence, CAD drawing services are considered as one of the sophisticated programs by the engineers and architects to create outstanding 2D and 3D models. […]

Posted on 15 September, 2022

A vessel which runs or operates above atmospheric pressure can be called as Pressure vessels. Pressure vessels are capable of holding the volume of liquids, vapours, and gases above atmospheric pressure. There are several equipment’s working under this philosophy such as Heat Exchangers, Filters, Heaters, Coolers and Reaction vessels. The safety of this pressurized vessels […]

Posted on 3 December, 2021

Product development is very critical for a company’s success. It encapsulates the value offering in its purest form. Companies create prototypes to determine the actual product. This step helps to reduce the cost since any resource spent is confined only to the prototype stage if the idea fails. The latest advancement is Rapid prototyping. So, […]